Airdrop System V2 for Mavic Air 2/2s

Specification

Brand

STARTRC

Model

ST-1109410

Net weight

56.3g

Gross weight

83g

Collapsed size

143×62×40mm

Box size

146×62×42mm

Charging current

1А

Battery capacity

100mAh

When the battery is fully charged

The system will release load about 400 times

Material

ABS

Extended size

143×95X33mm

Color

Gray

Charging time

70 Mins

There is a independent switch for the two underview lights on the air-dropping system, pressing it one time to turn on the lights, and pressing it again to turn off the lights. The toggle switch on the air-dropping system is power switch. When you open it, the light beside the toggle switch will on and green, it means the air-dropping system is in working condition, and you can open the switch of underview rights according to the remote controller, and the system will release load.

Another switch is touch-button. It is used to adjust the angle of the air-system hook, and make the system ready to do next releasing. Foldable design High toughness ABS material, fine workmanship, comfortable handle, Special quick-release and foldable design

Set Up

1. Turn over the drone, and then align the front (with STARTRC logo) of the system kit to the front of the bottom of the drone
2. Snap on the front of the system kit to the bottom first
3. Snap on the rear of the system kit to the bottom
4. Pull the landing gear to both sides
5. Check if the hook direction of air-dropping system is up
6. If not, please open the toggle switch on side of the system, and then press and hold the small button on the side to adjust the hook direction until it is up
7. Fix the attached rope on the hook
8. Power on your drone, and then open the switch of underview rights on the remote controller, the air-dropping system will begin to work